Fusor® 803 Direct-to-Metal Adhesive/Sealant - Black View larger

Fusor® 803 Direct-to-Metal Adhesive/Sealant - Black

New product

Duplicates factory look on standing seams, cosmetic seams, truck bed seams, tooled door skin seams, floor pan seams, core support seams, brushed seams and any other application in which a non-sag cosmetic seam sealer is required

Buy 12 cartridges of FUSOR 800DTM or 803DTM AND get a FUSOR 313 MANUAL ONE-COMPONENT GUN FOR FREE!!!

More details

$15.99

36 Items

  • LORD Fusor® 800DTM/803DTM direct-to-metal adhesive/sealant is a one-component, moisture-cure product used for duplicating factory appearance on standing seams, cosmetic seams, truck bed seams, tooled door skin seams, floor pan seams, core support seams, brushed seams and other applications in which a non-sag cosmetic seam sealer is required.

    Fusor adhesive/sealant is available in the following colors:

    • Neutral – Fusor 800DTM Adhesive/Sealant = 9.5 oz (281 mL)

    • Black – Fusor 803DTM Adhesive/Sealant = 9.5 oz (281 mL)

    Substrates: Cold rolled steel, coat and aluminum

    Features and Benefits

    Durable – creates high strength bonds; exhibits excellent primerless adhesive properties.

    Convenient – requires no mixing; skins over quickly at room temperature.

    Chemically Resistant – solvent resistant when cured. Painting and most cleaning processes do not affect bond strength.

    Temperature Resistant – uncured material can endure 225°F (107°C) for 60 minutes, and cured material can endure 325°F (163°C) for 60 minutes with no negative effect.

    Environmentally Resistant – resists weathering and aging; provides excellent resistance to indirect UV exposure.

    Non-Sag – remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility

    Typical Properties*

    Appearance Neutral or Black

    Paste Skin Time 15-45 minutes @ 70°F (21°C), 50% RH

    Work Time 25 minutes @ 70°F (21°C), 50% RH

    Paint Time Immediately; Up to 30 days without a scuff

    Full Cure 72 hours @ 70°F (21°C)

    REQUIRES FUSOR 412 NOZZLE - Included

20 other products in the same category: